Registering Your Settings - Canon imageFORMULA DR-X10C User Manual

To scan barcodes
After installing the included Barcode Module, you can scan barcodes
on documents. Click the [Barcode] button on the [Others] tab to
configure barcode scanning conditions.
See Help for details about settings.
When you want to remove dots and
notches that appear in documents
You can remove dots and notches protruding from object outlines that
appear in documents from scanned images.
• Select the [Erase Dot] check box to automatically remove isolated
black dots (3 x 3 dot size) from white backgrounds (or white dots
from black backgrounds).
• Select the [Erase Notch] check box to remove notches that protrude
from object outlines in scanned images.

Registering Your Settings

You can register the scanning conditions so that you can use them
next time.
When you want to save a scanner driver
setting
When you finish configuring a setting, click the [Save] button of [User
Preference] to save the setting.
The saved setting is registered to the list. You can delete a setting
from the list with the [Delete] button, and save or load a configuration
file with the [Back Up] or [Restore] button.
150