Honeywell IdentIPoint Quick Installation Manual page 6

Honeywell IdentIPoint Intelligent Smartcard Readers
PUNCH AN ADEQUATE NUMBER PUNCH AN ADEQUATE NUMBER
OF HOLES IN THE DRYWALL OF HOLES IN THE DRYWALL
FOR THE SCREWS FOR THE SCREWS
GANGBOX EMBEDDED IN WALL GANGBOX EMBEDDED IN WALL
USE THE SCREWS PROVIDED USE THE SCREWS PROVIDED
TO FIX THE READER BACK- TO FIX THE READER BACK-
PLATE TO THE EMBEDDED PLATE TO THE EMBEDDED
GANGBOX. GANGBOX.
NOTE: USE A MINIMUM OF 2 NOTE: USE A MINIMUM OF 2
SCREWS IN THE HOLES SCREWS IN THE HOLES
CIRCLED IN RED TO FASTEN CIRCLED IN RED TO FASTEN
THE BACK-PLATE THE BACK-PLATE
95-7771
CUT AN OPENING IN THE CUT AN OPENING IN THE
DRYWALL FOR ROUTING THE DRYWALL FOR ROUTING THE
WIRES. THE OPENING MUST WIRES. THE OPENING MUST
HAVE THE SAME DIMENSIONS HAVE THE SAME DIMENSIONS
AS THAT IN THE BACK-PLATE. AS THAT IN THE BACK-PLATE.
USE THE SCREWS PROVIDED USE THE SCREWS PROVIDED
TO FIX THE BACK-PLATE TO TO FIX THE BACK-PLATE TO
THE DRYWALL. THE DRYWALL.
NOTE: USE A MINIMUM OF 4 NOTE: USE A MINIMUM OF 4
SCREWS IN THE HOLES SCREWS IN THE HOLES
CIRCLED IN RED CIRCLED IN RED
6
Fig.3. Fixing
reader back-
plate to
drywall
Fig.4. Fixing
reader back-
plate to
concrete wall