Advertisement
Honeywell IdentIPoint Intelligent Smartcard Readers
CAUTION: Electro-static discharge
(ESD) can damage CMOS
integrated circuits and modules. T
prevent damage always follow
procedures:
Use static shield packaging and
containers to transport all electronic
components, including completed
reader assemblies.
Handle all ESD sensitive components at
an approved static controlled
workstation.
BEFORE INSTALLATION
1. Verify the mounting locations with the job
drawings.
2. Unpack the IdentIPoint reader, IOM and
accessories and check them. Report any
damaged or missing components to a
Honeywell representative. A claim must
be filed with the commercial carrier
responsible.
Parts
Reader box
1. Intelligent Reader Unit – 1
2. Mounting Plate – 1
3. Mounting Hardware - Screws and Wall
Anchors – 6 each
95-7771
4. Extra Tamper Resistant Screws – 2
5. Tool for Tamper Resistant Screw – 1
6
. Connector with cable – 2 (9 and 10 pin)
o
7. Resistors – 2K (Color Code: RED-
these
BLACK-RED-GOLD; 0.5W axial type, 5%
tolerance) – 3
8. Resistors – 1K (Color Code: BROWN-
BLACK-RED-GOLD; 0.5W axial type, 5%
tolerance) – 3
9. Square ferrite clip – 1
10. Round ferrite clip – 1
11. Quick Installation Guide – 1
IOM box
1. Input / Output Module Unit – 1
2. Mounting Hardware - Screws and Wall
Anchors – 3 each
3. Extra Tamper Resistant Screws – 2
4. Tool for Tamper Resistant Screw – 1
5. Connectors for termination – 12 x 2
connections; 3 x 3 connections
6. Resistors – 2K (Color Code: RED-
BLACK-RED-GOLD; 0.5W axial type, 5%
tolerance) – 4
7. Resistors – 1K (Color Code: BROWN-
BLACK-RED-GOLD; 0.5W axial type, 5%
tolerance) – 4
8. Quick Installation Guide – 1
2
Advertisement
