Honeywell IdentIPoint Quick Installation Manual page 17

AFTER WIRING AND AFTER WIRING AND AFTER WIRING AND
OTHER HARDWARE OTHER HARDWARE OTHER HARDWARE
CONFIGURATIONS ARE CONFIGURATIONS ARE CONFIGURATIONS ARE
DONE, SHUT THE FRONT DONE, SHUT THE FRONT DONE, SHUT THE FRONT
COVER OF THE IOM COVER OF THE IOM COVER OF THE IOM
Fig.15. Routing the wires and connecting them to the IOM PCB
Honeywell IdentIPoint Intelligent Smartcard Readers
17
ROUTE THE WIRES ROUTE THE WIRES
THROUGH THE THROUGH THE
KNOCKED OUT HOLES KNOCKED OUT HOLES
AND FIX THEM TO THE AND FIX THEM TO THE
CORRECT TERMINALS CORRECT TERMINALS
ON THE PCB USING THE ON THE PCB USING THE
PROVIDED WIRE PROVIDED WIRE
TERMINAL BLOCKS TERMINAL BLOCKS
95-7771