Table of Contents
Advertisement
Installation
ANN-RLY Annunciator Module
Specifications
•
Operating Voltage: 24 VDC
•
Max. Current:
Alarm: 75 mA
Standby: 15 mA
•
Operating Temperature: 32°F to 120°F (0°C to 49°C)
•
For indoor use in a dry location only
Mounting/Installation
The ANN-RLY relay module can be mounted inside the FACP main circuit board chassis or inside the ROME Series enclosure. Refer to the
ANN-RLY Installation Document #53033 for instructions on chassis mounting or to the ROME Series Installation Document #53530 for
mounting in the separate backbox.
44
FACP Chassis Installation
mounting holes
mounting hooks through
mounting slots
ROME Series Installation
using ANN-MBRLY mounting bracket
mounting holes
ANN-RLY on
mounting holes
ANN-MBRLY
mounting bracket
Figure 2.28 ANN-RLY Mounting Options
FACP Backbox Installation
using ANN-MBRLY mounting bracket
grounding wire
mounting holes
ANN-MBRLY
mounting bracket
ANN-RLY
mounting holes
ES-50X Series Manual — P/N LS10129-000FL-E:D 4/26/2021
Optional Module Installation
Advertisement
Table of Contents
