Breville Smart Mist Top Connect Instruction Book page 7

Hide thumbs Also See for Smart Mist Top Connect:
Table of Contents

Advertisement

• The installation of a residual
current device (safety switch)
is recommended to provide
additional safety protection
when using electrical
appliances. It is advisable that
a safety switch with a rated
residual operating current not
exceeding 30mA be installed
in the electrical circuit
supplying the appliance. See
your electrician for
professional advice.
• During electrical storms, the
appliance should be
disconnected from the power
source at the wall socket to
prevent any electrical surges
that may arise during the
storm and which may
inadvertently cause damage
to the appliance and its
electronic componentry.
• Always turn the appliance to
the off position, switch off at
the power outlet and unplug
at the power outlet when the
appliance is not in use.
FOR HOUSEHOLD USE ONLY
SAVE THESE INSTRUCTIONS
• Before cleaning, always turn
the appliance to the off
position, switch off at the
power outlet, unplug at the
power outlet and remove the
power cord, if detachable,
from the appliance and allow
all parts to cool.
• Do not place this appliance
on or near a heat source, such
as hot plate, oven or heaters.
• Position the appliance at a
minimum distance of 20cm
away from walls, curtains and
other heat or steam sensitive
materials and provide
adequate space above and on
all sides for air circulation.
WARNING
To avoid electric shock, do not
connect the plug to the power
outlet when hands are wet.
7

Hide quick links:

Advertisement

Table of Contents
loading

This manual is also suitable for:

Lah508Lah508grt2ian1

Table of Contents