Breville Smart Mist Top Connect Instruction Book page 13

3. The humidifier will continue to monitor
and regulate as required to maintain the
comfort zone, adjusting the mist intensity.
Once the comfort zone has been achieved,
the humidifier will stop the mist intensity
automatically and will then operate
again if the humidity level falls below the
comfort zone.
4. If the Timer has not been programmed, the
humidifier will continue to operate in FULL
AUTO mode until turned off manually,
programmed to another mode or when the
water tank is empty.
NOTE
The room temperature shown on the display
screen is taken only within the vicinity of the
sensor and may be influenced by positioning,
airflow and other environmental factors. Actual
room temperature may vary slightly.
SEMI-AUTO MODES
This humidifier can achieve 2 semi-
auto modes: ADJUSTABLE SPEED and
ADJUSTABLE HUMIDITY modes.
• In ADJUSTABLE SPEED mode, the
humidifier automatically keeps the humidity
in the comfort zone with the SensAir
System™ while the mist intensity can be
manually selected.
• In ADJUSTABLE HUMIDITY mode, the
humidifier automatically adjusts the mist
intensity to maintain a pre-selected relative
humidity level.
• ADJUSTABLE SPEED and ADJUSTABLE
HUMIDITY can only be accessed when the
humidifier is on FULL AUTO mode.
• The Timer, Night mode, Warm Mist and ION
features can be used with these modes.
ADJUSTABLE HUMIDITY
To program ADJUSTABLE HUMIDITY,
touch the HUMIDITY/NIGHT symbol
on the control panel repeatedly to cycle
through until the desired RH flashes on the
display screen. The RH number will flash 3
times then illuminate. The
icon will illuminate and the % icon will
flash continuously during this setting. The
humidifier will start automatically if the room
humidity is lower than the selected humidity. If
the room humidity is higher than the selected
humidity, 'HI' will display on the display screen,
and mist will not be released.
The humidity level can be selected in 5%
increments between 30% and 90%.
The mist intensity level will not illuminate as
it will automatically modulate to achieve the
desired humidity level.
Once the chosen relative humidity has been
reached, the mist will stop releasing and will
automatically restart once the humidity level
falls below the set humidity.
ADJUSTABLE SPEED
To program ADJUSTABLE SPEED,
touch or slide your finger along the
CONTROL bar on the control panel to change
the mist intensity as desired. The mist intensity
level will display and the on the right-hand
side of the display screen, the mist intensity
level will illuminate. The humidifier will start
automatically if the room humidity is lower
than the comfort zone.
If the ideal relative humidity is higher than the
ideal humidity in the "Comfort Zone" , 'HI' will
display on the display screen and adjustable
speed cannot be programmed.
The mist intensity level can be selected from
LOW (1) to HIGH (5).
The room temperature and relative humidity
will alternate on the display screen every 10
seconds when in operation.
Once the ideal relative humidity has been
reached, the mist release will stop operating
automatically and will restart once the
humidity level falls below the set humidity for
the room temperature.
FULL AUTO
NOTE
NOTE
MIST LEVEL
13