PROBLEM
POSSIBLE CAUSES
•
Abnormal noise.
Vibration in the water basin because
the water level is too low.
•
Humidifier is on an unstable surface.
•
Water tank is positioned incorrectly.
•
Humidifier is malfunctioning.
•
The humidification
There is natural or artificial air
capacity is too low.
replacement in the room which will
interfere with the increase of %RH.
•
The air inlet grids and nozzle
could be blocked.
•
Too much scale in the water basin.
•
The humidity selected rate is too low.
•
Water is too dirty or water kept too
long in the tank.
•
The ambient
Humidifier is working in
humidity is too
Manual mode.
•
high.
The humidity target is too high.
•
Room is not well-ventilated.
•
Excess water from the water tank has
spilled while filling the water tank or
replacing the water tank back into
the housing.
•
Condensation in the
The room temperature is too low.
room.
•
The mist suddenly
Programmed timer period
stops.
has run out.
•
The water empty indicator is on.
•
The target humidity level is reached.
•
Adjustable Speed is
The room humidity is higher than
not operating
the selected humidity.
•
Does not operate,
The water tank basin has too
and 'EF' displays on
much water.
the display screen
WHAT TO DO
•
Fill the water tank with clean water.
•
Move the humidifier to a stable
flat surface.
•
Turn off and unplug the humidifier,
then align the water tank cover with its
respective opening in the inner chamber.
•
Switch the unit off and contact the
Breville Customer Service Centre.
•
Check if doors and windows are closed.
•
Check if there is no air conditioning
working in the room.
•
Remove any blocking items from the
grids and the nozzle.
•
Clean transducer.
•
Increase mist output speed.
•
Increase humidity setting rate.
•
Clean water tank, change to fresh
clear water.
•
Change the mode.
•
Select a lower %RH number.
•
Open a window to ensure proper air flow
for the humidifier, or move the humidifier
to a more well-ventilated room.
•
Wipe off excess water from the top and
bottom of the housing before replacing
the water tank.
•
Increase heat in the room up.
•
Turn the humidifier back on.
•
Refill the water tank.
•
No action required.
•
Over-ride the set program.
•
Remove the filled water tank, then
remove the excessive water from the
water basin. Return the filled water tank
and try again.
25