Breville Smart Mist Top Connect Instruction Book page 11

10. Ensure the mist nozzle is fitted correctly on
the mist guide of the water tank. If tilted,
lightly push the mist nozzle back onto
the mist guide.
11. Replace the top cover back on the water
tank, ensuring the tab sits in the top back
of the humidifier. The top cover should sit
flat and the mist nozzle should be flat to
the top cover when correctly positioned on
the humidifier.
IMPORTANT
Ensure the top cover sits flat on the top of the
humidifier. If the mist nozzle sits higher or
lower than the top cover when in operation,
condensation will build on the top cover and
around the humidifier.
12. Connect the power plug to a 230V or 240V
power outlet and switch the outlet on. The
POWER symbol will illuminate red and
the WI-FI icon will flash. The humidifier
is now in Standby mode.
13. Touch the
the control panel and display screen. The
humidifier is now switched on and will
automatically begin operation in
FULL AUTO mode.
IMPORTANT
Water may remain in the water inlet basin
even though the water tank may be empty.
However, once the water in the tank and/or
basin is too low to keep the humidifier running,
✔
the humidifier will stop working. Refill the tank
with water. Do not use the humidifier without
water in the water tank.
NOTE
Take care when removing the water tank from
the body after use as residual water may drip.
✘
POWER symbol to activate
BEF
• Re
m
yo
an
co
• Re
(se
an
in
• Se
pu
• Fo
20
• En
bl
• En
pe
• Pl
po
Rem
Wh
lift t
gen
11