Breville Smart Mist Top Connect Instruction Book page 22

MIST NOZZLE
• If the mist output is reducing due to
calcification, turn the top cover over and
immerse the nozzle in a vessel filled with
vinegar and water solution and soak for at
least 10 minutes.
• Rinse with clean or distilled water and
allow to dry.
WATER INLET BASIN
• The water inlet basin includes the water
reservoir in the base of the unit that also
houses the transducer and the heating plate.
• Clean the water basin with a soft cloth. If
there is excess film or calcification on the
surface, then soak the cloth with the vinegar
and water solution and repeat the process.
• If there is film or calcification in any of
the depressions along the basin, drop a
bit of vinegar and water solution into the
depression and lightly clean it with a brush or
a cotton swab.
• Rinse with clean or distilled water and
allow to dry.
OPTIONAL CLEANING SOLUTION
FOR CALCIFICATION ISSUES
• If a build-up of calcification on the transducer
or heating plate occurs and cannot be
removed with a simple vinegar and water
solution, use a de-calcifying agent or
citric acid.
STRICTLY FOLLOW THE
INSTRUCTIONS ON THE PACKAGING
FOR THESE CLEANING PRODUCTS.
• Brush off any scale deposits from the
transducer and heating plate surfaces using
the brush or a cotton swab.
• Rinse with clean or distilled water and
allow to dry.
22
WARNING
Never use sharp or solid objects to clean
the transducer and heating plate. Avoid
touching the transducer and heating plate with
your fingers.
NOTE
The heating plate in the base of the humidifier
will lose its stainless steel finish over time – this
is normal. It is still recommended to de-calcify
as per instructions noting that cleaning may
not bring it back to its original shine.
WATER PURIFICATION FILTER
It is recommended that you clean the water
purification filter every time you clean the
humidifier, especially if in frequent use. If
the filter is cleaned regularly and as per
instructions, it should last for the life of
the humidifier.
1. Remove the cover from the top of the
humidifier and set aside.
2. Using the handle, remove the water tank
from the humidifier.
3. The water purification filter is connected to
the water tank base. Unscrew the filter from
the base to clean.
4. Dip the filter cartridge in a vinegar and
water solution for about 10 minutes before
thoroughly rinsing with clean water.
Alternatively, rinse the filter under running
tap water for a minute.