Wi-Fi Connectivity - Breville Smart Mist Top Connect Instruction Book

Wi-Fi
Connectivity
The Smart Mist Top™ Connect Humidifier
can offer remote operation by using a home
Wi-Fi connection and the Breville Home
Connect™ app downloaded to a compatible
mobile phone. through the Google Play store
or Apple App store.
To go straight to the appropriate app store,
scan the QR code below.
For instructions on how to use the app, scan the
QR code below, refer to the Quick Start Guide
that can be found in the box or go to
tinyurl.com/HomeConnectQuickStart.
NOTE
The Breville Home Connect™ app is compatible
with mobile phones running Android
later and iOS devices 9.0 or later.
NOTE
To control the humidifier using the app, the
humidifier must be plugged into an active
power outlet and switched on at the power
outlet. If the humidifier is switched OFF at the
power outlet or disconnected from the power
outlet, then the app cannot connect to the
humidifier via the network.
CONNECT YOUR HUMIDIFIER TO
WI-FI
1. Ensure the mobile device is connected to a
home Wi-Fi network.
2. The humidifier must be on standby mode.
Once the
display screen, the humidifier is ready
to connect.
3. Log into your Breville Home Connect™ app
account and stay on the "Home" page. To add
the humidifier to the list, touch 'Add Device'
or the symbol found in the top right-hand
corner of the screen. Follow the prompts in
the app to scan the device (recommended) or
connect in manual EZ mode (default).
4. If the connection is successful, the humidifier
will appear in the main page of the app and
the
5. If the connection is not successful, the
icon will flash slowly. Touch and hold
for 3 seconds until 1 beep sounds. The
icon will flash rapidly, and the humidifier
is ready to connect to the app through
EZ Mode again.
5.0 or 6. If EZ mode failed to connect, follow the
®
prompts in the app to automatically begin
AP mode (manual mode). To connect
through AP mode, touch and hold
5 seconds until 2 beeps sound. The
will flash slowly. Follow the prompts in the
app to connect in manual AP mode.
NOTE
To return to EZ mode from AP mode, touch and
hold for 3 seconds.
icon flashes rapidly on the
icon on the humidifier will illuminate.
for
icon
17