Advertisement
CARE AND MAINTENANCE
The electronic ignition requires 1 "AA" alkaline battery, which is included.
DO NOT mix old and new batteries.
DO NOT mix alkaline, standard (Carbon-Zinc), or rechargeable (Nickel-Cadmium) batteries.
TROUBLESHOOTING
If you have any questions regarding the product, please call customer service at 213-4467172
PROBLEM
The burner does not
light by using the ig-
nitor procedure (we-
ak or no sparkbeing
generated).
Low Heat.
Excessive
Flare Ups.
WARNING
POSSIBLE CAUSE
1. The igniter electrode may be
covered with grease or residue.
2.
The igniter electrode may have
a loose or disconnected wire.
Cracked or broken ignition elect-
3.
rode .
Dead battery or faulty battery con-
4.
nection.
the unit.
Grease and/or residue build-up
1.
on heat tents or in firebox.
Excessive dripping of fat or m-
2.
arinade from food.
Cooking temperature too high.
3.
CORRECTIVE ACTION
Clean the ignitor electrode.
1.
Check the connection and reconnect
2.
any loose or disconnected wires.
Replace ignition electrode (see Replace
3.
ment parts list).
Perform any of the following:
4.
a.Replace battery
b.Check to see if battery is inserted
correctly.
c.Check for any corrosion around ba-
ttery terminals.
d.Check wire connections as stated a-
bove
Call a qualified service agency to check
the gas supply pressure and correct the
pressure.
Clean the grill components.
1.
Trim the fat from meat and use non-oil
2.
based marinades.
Lower temperature accordingly.
3.
20
Advertisement
