Advertisement
OPERATION INSTRUCTIONS
Lighting The Grill
Remove all hangings or plastic straps, if present. Before you cook on your new gas grill, it is important
to clean your grill with heat. To do this, operate the grill for approximately 15 minutes with the lid closed
and the control knob in the highest position. This will clean the internal parts by burning off any residue
and odor from the manufacturing process.
cylinder valve and then TURN OFF the control knob.
Do not lean over grill when lighting. Read instructions before lighting.
1. Check that the control knobs are in the
2. Open valve at tank fully by turning
3. Open lid during lighting.
4. Push igniter
down 3 to 4 seconds while turning right side control knob to the high
burner should ignite. If ignition does not take place within 5 seconds, immediately turn the control knob
to the
OFF position. Wait 5 minutes and repeat step 4 above or refer to match lighting instructions
in the manual.
5. Repeat step 4 above to ignite all other burners.
If the burner still does not light, check that there is gas in the cylinder and follow the match lighting
instructions. Check the Troubleshooting Guide on page 16 for more information.
CAUTION
WARNING
OFF position.
counterclockwise.
15
ion, immediately TURN OFF the
position. The
Advertisement
