Operation - Makita DSD180 Instruction Manual

Attaching blade cap
CAUTION:
Always attach the blade cap when
tool is not used. A bare blade may cause personal
injury or damage to the blade itself.
Pass the blade cap through the blade until the hook
catches the base cover. Note the direction of the blade cap
when attaching; the wider hook comes front side. When
removing the blade cap, lift it while pinching the both sides.
1
► 1 . Blade cap 2. Hook
During operation, insert the blade cap to the hook on
the base as illustrated until it clicks.
1
► 1 . Blade cap 2. Hook
Hex wrench storage
When not in use, store the hex wrench as shown in the
figure to keep it from being lost.
► 1 . Hex wrench
Connecting a vacuum cleaner
CAUTION:
necting vacuum cleaner.
Connect a Makita vacuum cleaner for clean operation.
Remove the rubber cap on the dust collector and con-
nect the vacuum cleaner's hose to the nozzle of the
dust collector.
2
► 1 . Dust collector 2. Rubber cap 3. Vacuum cleaner
hose

OPERATION

CAUTION:
CAUTION:
the workpiece during cutting. Never perform a
curved cut. Failure to do so may cause blade break-
age, resulting in a serious injury.
The V-notch and convexed portion in the base cover of
the tool indicate the position of the blade. Always check
2
the blade position when cutting.
The base cover of the tool
1
► 1 . V-notch 2. Convexed portion 3. Blade
10 ENGLISH
Attach the blade cap before con-
1
3
Hold the tool firmly.
Always hold the base flush with
1
2
3
2