Makita DSD180 Instruction Manual
Cordless drywall saw
Hide thumbs
Also See for DSD180:
- Instruction manual (65 pages) ,
- Instruction manual (9 pages) ,
- Instruction manual (64 pages)
Table of Contents
Advertisement
Quick Links
Advertisement
Table of Contents
Related Manuals for Makita DSD180
Summary of Contents for Makita DSD180
- Page 1 INSTRUCTION MANUAL Cordless Drywall Saw DSD180 Read before use.
-
Page 2: Specifications
SPECIFICATIONS Model: DSD180 Length of stroke 6 mm Strokes per minute 0 - 6,000 min Maximum cutting capacities Drywall 30 mm Wood 15 mm Rated voltage D.C. 18 V Overall length 258 - 263 mm (Depending on the battery) Net weight 1.7 - 2.0 kg... -
Page 3: Ec Declaration Of Conformity
Do not expose power tools to rain or wet con- NOTE: The declared vibration total value(s) has been ditions. Water entering a power tool will increase measured in accordance with a standard test method the risk of electric shock. and may be used for comparing one tool with another. Do not abuse the cord. - Page 4 Battery tool use and care Recharge only with the charger specified by the manufacturer. A charger that is suitable for one type of battery pack may create a risk of fire when used with another battery pack. Use power tools only with specifically desig- nated battery packs. Use of any other battery packs may create a risk of injury and fire.
- Page 5 Makita warranty for the Makita tool and charger. Important safety instructions for Tips for maintaining maximum...
-
Page 6: Functional Description
Battery protection system FUNCTIONAL DESCRIPTION Lithium-ion battery with star marking CAUTION: Always be sure that the tool is switched off and the battery cartridge is removed before adjusting or checking function on the tool. Installing or removing battery cartridge CAUTION: Always switch off the tool before installing or removing of the battery cartridge. - Page 7 Switch action Battery indicator status Remaining battery capacity 50% or more 20% - 50% Less than 20% Indicating the remaining battery ► 1 . Switch trigger capacity CAUTION: Only for battery cartridges with the indicator Before installing the battery car- tridge into the tool, always check to see that the switch trigger actuates properly and returns to the "OFF"...
-
Page 8: Adjusting Depth Of Cut
Adjusting depth of cut ASSEMBLY The cutting depth corresponds with the scale on the blade. Loosen the screw on the blade holder until the CAUTION: Always be sure that the tool is blade can move freely. Align the scale on the blade with switched off and the battery cartridge is removed the bottom line of the blade holder. - Page 9 Replacing drywall saw blade Installing snap-off blade CAUTION: CAUTION: Always clean out all chips or for- Always use the snap-off blade with eign matter adhering to the blade and/or blade designated length, width, and thickness. An inap- holder. Failure to do so may cause insufficient tight- propriately installed snap-off blade can be broken. A ening of the blade, resulting in a serious personal broken blade can fly off and cause a personal injury.
-
Page 10: Operation
A bare blade may cause personal necting vacuum cleaner. injury or damage to the blade itself. Connect a Makita vacuum cleaner for clean operation. Pass the blade cap through the blade until the hook Remove the rubber cap on the dust collector and con- catches the base cover. -
Page 11: Optional Accessories
Perform the cleaning periodically. Dirty base cover may damage or deface the working surface. To maintain product SAFETY and RELIABILITY, repairs, any other maintenance or adjustment should be performed by Makita Authorized or Factory Service Centers, always using Makita replacement parts. OPTIONAL ACCESSORIES CAUTION: These accessories or attachments... - Page 12 Makita Europe N.V. Jan-Baptist Vinkstraat 2, 3070 Kortenberg, Belgium Makita Corporation 3-11-8, Sumiyoshi-cho, Anjo, Aichi 446-8502 Japan 885512A228 www.makita.com 20190201...