Input Elements - GE Multilin MIGII Instruction Manual

6.1 INPUT CONFIGURATION
The following table shows the list of elements that can be assigned to each input. The table is divided into groups
INHIBITIONS 1 BY DIGITAL
INPUT
INHIBITIONS 2 BY DIGITAL
INPUT
INPUTS
6
6-4
NO DEFINITION INPUT NOT ASSIGNED
37 disabled 37 trip disabled
50P disabled 50P trip disabled
50G disabled 50G trip disabled
49 disabled 49 trip disabled
48 disabled 48 trip disabled
51P disabled 51P trip disabled
51G disabled 51G trip disabled
87R disabled 87R trip disabled
46 disabled 46 trip disabled
66 disabled 66 operation disabled
Trip disabled Trip of all functions is disabled
Breaker 52 b This function set means breaker open
Trip contact close (PULSE) This function allows activating the trip output
Table change Enabled means that the active table is T2.
Disabled means that active table is the General Settings table
Settings change disabled Enabled means that settings and active table cannot be changed.
It is only possible to switch to T2 through digital input Table change
Reset (PULSE) This function allows LED and output Latch reset
Oscillo trigger (PULSE) This function allows to activate the oscillo function
Emergency reset input Emergency reset activation
(PULSE)
General input Generic function that may be used in logic configuration.
MIGII Digital Protection for Electrical Machines
6 I/0 CONFIGURATION

6.1.2 INPUT ELEMENTS

GEK-113188A