6.2.1 General Setup
In the General Setup page you can enable/disable the Call Filter or
Data Filter and assign a Start Filter Set for each, configure the log
settings, and set a MAC address for the logged packets to be
duplicated to.
Some on-line games (for example: Half Life) will use UDP packets
with large length to transfer data. These large UDP packets need to
be fragmented. As secure firewall, Vigor router will reject these
kinds of packets to avoid to be attacked by outside hackers if you do
not enable "Accept Incoming Fragmented UDP Packets". You can
enable "Accept Incoming fragmented UDP Packet" function to
accept these kinds of packets. Then you can play these kinds of
on-line games. If you take security concern as high priority, you
shall disable "Accept Incoming Fragmented UDP Packets".
Call Filter
Check Enable to activate the Call Filter function. Assign a start filter
set for the Call Filter.
Firewall Setup
6-7