4. Assign these two profiles to the PPPoE Internet access profile.
Now, the PPPoE Internet connection will follow the schedule order to
perform "Force On" or "Force Down" action according to the time
plan that has been pre-defined in the schedule profiles.
7.2.3 UPnP
You can enter the UPNP Setup as below as below picture shown.
Enable UPNP Service:
Accordingly, you can enable either the Connection Control Service
or Connection Status Service.
Click the IP Broadband Connection on DrayTek Router on Windows
XP/Network Connections, as shown below. The connection status and
control status will be able to be activated. The NAT Traversal of UPnP
enables the multimedia features of your applications to operate. This
has to manually set up port mappings or use other similar methods. The
Application Setup
7-10