Table of Contents
Advertisement
5. Settings
5.5.3. Restoring this product's settings to their factory-set defaults from
the Web GUI
This product can be restored to its factory-set state by making settings from the Web GUI.
Memo
• This explanation assumes that you have logged in using the steps in
to this product using a Web
1. Select the "Administration" tab – "Maintenance" – "Restart or Initialize," in that order.
The "Restart or Initialize" screen appears.
2. In the "Initialize" section, click the "Proceed" button.
The "Initialize" screen appears.
3. Enter the administrative password, and click the "Confirm" button.
The "Confirm execution" screen appears.
4. Verify the contents, and click the "Execute" button.
The product is returned to its factory-set state. Also, the "Initialization" dialog box appears,
and the product reboots.
5. After this product finishes rebooting, access the Web GUI again.
Memo
• During reboot, the computer on which the Web GUI is open will be unable to
communicate with the product (the status indication of the computer's
network adapter will be "Network cable is not connected"). Communication will
be restored when the reboot is completed. The IP address of this product will
be restored to the factory default setting (192.168.100.240) after rebooting.
Once Web GUI is redisplayed, access "192.168.100.240".
36 | L2 SWITCH SWX2320-16MT User Guide
browser".
"Logging in
Advertisement
Table of Contents
