Installing Onto A Wall Or Ceiling - Yamaha SWX2320-16MT User Manual

3.3. Installing onto a wall or ceiling

Attach the included wall mount hardware (2 pcs.) using the included screws (6 pcs.).
Items to prepare
• Wall or ceiling mounting screws (6)
Screws for installing this product onto a wall or ceiling are not included. You will need to
purchase commercially available screws.
The type and length of screws differ depending on where the product is to be installed. Be sure
to check the material and thickness of the wall where the product is to be installed, and use
screws appropriate for the wall material.
Caution

• Use the appropriate screws.
If the product falls, you may be injured or the product may become damaged.
Mounting template
The product can be installed with its rear panel or either side facing up, but not with the front panel
facing up or at an angle.
Warning
• When attaching or removing this product, you must disconnect the product's

power plug from the power outlet.
Failing to do so could cause electrical shock or malfunctions.
• Do not install with the front panel facing up.
Doing so could cause a malfunction or fire.
Caution
• Do not attach this product in a high place.

Make sure that the installation height is no greater than 200 cm.
If the product falls, you may be injured or the product may become damaged.
• Make sure to follow the steps for installation in this manual. Failure to do so
could cause electrical shock or malfunctions.
L2 SWITCH SWX2320-16MT User Guide | 15
3. Installation