Settings; Making Settings From The Command Line Using The Console Port - Yamaha SWX2320-16MT User Manual

5. Settings

The settings for this product can be made in the following ways.
•

Making settings from the command line using the CONSOLE port

• Making settings from the command line using Telnet
• Making settings from the command line using SSH
• Making settings using the Web GUI
• Restoring this product's settings to their factory-set defaults
You can log in to this product either as a standard user or as an administrative user. This section
explains how to log in as an administrative user.
See "Technical data" for details.
For details on the commands used by this product, refer to "Command reference."
5.1. Making settings from the command line using the CONSOLE
port
Here we explain the cable, driver, software, and settings that are necessary in order to use the
CONSOLE port.
5.1.1. Preparing a console cable
• Connect the computer to the CONSOLE port of this product using a USB cable or an RJ-45/DB-9
console cable.
• For the USB cable connected to the mini-USB CONSOLE port, use a USB cable that is equipped
with a USB Type A connector and a mini-USB Type B (5-pin) connector, which supports data
communication. Charge-only cables cannot be used.
5.1.2. Installing the USB serial driver
• To use the mini-USB CONSOLE port, the USB serial driver must first be installed.
• For details on installing the USB serial driver, refer to the "Yamaha Network Device USB Serial
Driver Installation Guide."
The Yamaha Network Device USB Serial Driver Installation Guide and the installer can be
downloaded from the Yamaha website shown below.
Utility download: https://yamahaproaudio.com/
L2 SWITCH SWX2320-16MT User Guide | 27
5. Settings