Connecting To A Network Device Or Computer - Yamaha SWX2320-16MT User Manual

4. Connections
Memo

• This product does not have a power switch. The power turns on when you insert
the plug of the power cord connected to this product into a power outlet.

4.2. Connecting to a network device or computer

Using LAN cables, connect the LAN port of the network device or computer to the LAN ports of this
product.
When using fiber optic cables to make connections, install an appropriate SFP module in the SFP+ port.
For the attachment procedure, refer to
Referring to the following table, use cables that are compatible with the port's link speed.
Link speed
100BASE-TX/1000BASE-T
2.5GBASE-T
5GBASE-T
10GBASE-T
*The maximum transmission distances listed are theoretical. Actual transmission distances may vary
depending on the usage environment. Bundling cables or using similar methods may also cause ambient
noise, which may reduce the maximum transmission distance.
Caution
• Do not connect this product to a public Wi-Fi and/or Internet service directly.
Only connect this product to the Internet through a router with strong

password protections. Consult your router manufacturer for information on
optimum security practices.
• The LAN ports and the RJ-45 CONSOLE port all use the same 8-pin connector.
Improper connections may cause hardware damage or malfunction. Use care
when making connections.
20 | L2 SWITCH SWX2320-16MT User Guide
"Installing an SFP
Cables to use
Enhanced category 5 or higher
Enhanced category 5 or higher
Enhanced category 5 or higher
Category 6
Category 6A
module".
Maximum
transmission
distance
100 m
100 m (*)
100 m (*)
55 m (*)
100 m