Making Settings Using The Web Gui - Yamaha SWX2320-16MT User Manual

5.4. Making settings using the Web GUI

This explains how to log in to this product using the Web GUI.
For details on compatible Web browsers, refer to the website listed below.
Web browser compatibility with Web GUI on Yamaha network products:
http://www.yamahaproaudio.com/
5.4.1. Logging in to this product using a Web browser
1. Connect this product to the computer with a LAN cable.
2. Check the power supply of this product.
If this product is not powered on, turn on the power as described in
cord". Once the power is on, go to step 3.
3. Launch the Web browser and access "http://(IP address of this product)/."
When access is successful, a login screen appears where you can enter a user name and password.
Memo
• The IP address of this product is set to "192.168.100.240/24" by default when
shipped from the factory.

• If this product is not connected to a network, change the IP address of the
computer to use for settings to the "192.168.100.0/24" segment.
See the help documentation of your computer for how to change the
computer's IP address.
4. Enter the user name and password, and click the "Login" button.
With the factory settings, the user name and password are not specified, so it is not necessary
to enter a user name and password.
After successful login from the factory default state, a language selection screen is shown.
5. Select the language to use.
You can change the language after login from the Web GUI.
"Connecting the power
L2 SWITCH SWX2320-16MT User Guide | 33
5. Settings