English: HS3 User's Guide, Chapter 7
USER'S GUIDE
Service Calls
Service Call
Main ROM error
Main RAM error
NV-RAM error
Controller service error
Engine ROM error
Engine RAM error
Engine program error
Communication error
Paper width sensor error
Paper width level error
Paper dust error
Refill CAM position error
CR Position error/PWM error
CR Lock error
CR Initialize error
Thermistor error
Heater overheat error
Heater break error
AC heater error
Quench platen error
Encode error
LOIS error
7–2
If an unrecoverable error occurs, the printer indicates the need for a service call
by lighting all the LEDs and then the following combination of LEDs
alternately:
ON
OFF
If you see any of these service call indications, reset the printer in either of the
following ways:
Reset the printer using the control panel button and try to print again.
Turn off and on the power button and then try to print again.
If you cannot clear the error and see the same service call indication after
resetting the printer, consult your dealer or our authorized service representative.
Report the error status and situation referring to the above table.
Alarm
Manual
Data
Ready
Power