Table of Contents
Advertisement
English: HS3 User's Guide, Chapter 5
Installation of SIMMs
When you install SIMMs, follow these steps:
1. Turn off the printer and unplug the power cord from the wall socket.
Note
Be sure to turn the printer off before installing or removing the SIMMs.
2. Remove the five
marked screws holding the main controller board.
Fig. 5-2 Remove the main controller board
3. Unpack a SIMM and hold it by its edge.
Note
Do not touch the memory chips or the board surface. If static electricity collects,
it can damage the memory.
CHAPTER 5 OPTIONS
5–3
Advertisement
Table of Contents
