Table of Contents
Advertisement
English: CS3 User's Guide, Chapter 4
Online Button
Reset Button
FF/Cont Button
The Online button alternately turns the printer on-line and off-line.
If you press this button during printing, the printer immediately stops printing
and ejects the paper. Pressing this button again prints the rest of the print data. If
you want to cancel printing, cancel the print job in your application first and then
reset the printer.
When the printer becomes off-line because of an error, the printer can recover
from some errors and return to on-line by pressing this button.
When performing cleaning or resetting, the printer must be set to off-line first.
The Reset button is valid only in the off-line mode.
The printer is reset and restored to the user default settings.
Note
Remember that the Reset button clears data from the printer memory.
This button is valid only in the off-line mode.
If the Data LED is on, pressing the FF/Cont button prints any data remaining
in the printer after turning the printer off-line.
When you select manual feed in your application, the printer alerts you to load
paper in the manual feed slot by blinking the Manual LED. Press this button to
start feeding the paper.
If a recoverable error occurs, press the FF/Cont button to recover from the error
and return to the on-line state.
CHAPTER 4 CONTROL PANEL
4–3
Advertisement
Table of Contents
