Honeywell Captuvo SL22 User Manual page 25

The default centering window is a 169x128 pixel area in the center of the sled's
field of view. The following diagram illustrates the default top, bottom, left, and
right pixel positions, measured from the top and the left side of the sled's field of
view, which is 844 by 640 pixels.
0
40%
60%
100%
If a bar code is not within the predefined window, it will not be decoded or output
by the sled. If centering is turned on by scanning Centering On, the sled only
reads codes that intersect the centering window you specify using the Top, Bot-
tom, Left, or Right bar codes.
Scan Centering On, then scan one of the following bar codes to change the
top, bottom, left, or right of the centering window. Then scan the percent you
want to shift the centering window using digits on the inside back cover of this
manual. Scan Save. Default Centering = 40% for Top and Left, 60% for Bot-
tom and Right.
Centering On
Top of Centering Window
Left of Centering Window
40%
Top
Bottom
Left
Right
60%
Default
Center
Bottom of Centering Window
Right of Centering Window
100%
* Centering Off
2 - 3