Honeywell Captuvo SL22 User Manual page 54

Code 39
< Default All Code 39 Settings >
Code 39 On/Off
* On
Off
Code 39 Start/Stop Characters
Start/Stop characters identify the leading and trailing ends of the bar code.
You may either transmit, or not transmit Start/Stop characters. Default =
Don't Transmit.
Transmit
* Don't Transmit
Code 39 Check Character
No Check Character indicates that the sled reads and transmits bar code
data with or without a check character.
When Check Character is set to Validate, but Don't Transmit, the unit
only reads Code 39 bar codes printed with a check character, but will not
transmit the check character with the scanned data.
5 - 6