Honeywell Captuvo SL22 User Manual page 55

When Check Character is set to Validate and Transmit, the sled only
reads Code 39 bar codes printed with a check character, and will transmit
this character at the end of the scanned data. Default = No Check Charac-
ter.
* No Check Character
Validate, but Don't Transmit
Validate and Transmit
Code 39 Message Length
Scan the bar codes below to change the message length. Refer to
Message Length Description (page 5-2) for additional information. Mini-
mum and Maximum lengths = 0-48. Minimum Default = 0, Maximum
Default = 48.
Minimum Message Length
Maximum Message Length
Code 39 Append
This function allows the sled to append the data from several Code 39 bar
codes together before transmitting them to the host computer. When this
function is enabled, the sled stores those Code 39 bar codes that start with
a space (excluding the start and stop symbols), and does not immediately
transmit the data. The sled stores the data in the order in which the bar
5 - 7