2.7 Power control
This section explains the power control functions.
No.
Function
1
Power On
2
Power Off
3
Memory check
4
Power key control
5
Reset and resume
control
6
Power-saving control
Turns the DT-X100 unit on.
There are 5 types of factor that turn power on.
Turns the DT-X100 unit off.
There are 6 types of factor that turn power off.
Checks the status of memory after power is turned on. Displays a
warning message on the screen if the memory is corrupted.
Settings can be made to disable the Power key or prohibit turning the
power off.
There are reset methods based on various conditions (5 types).
A reset clears program execution status, but resume restores the
program execution state that preceded the power being turned off.
There are the following 5 control methods.
① Sleep
② Auto Power OFF (APO)
③ Dimming/ ABO (Auto Backlight OFF)
④ CPU clock frequency control
⑤ Virtual off (wireless standby)
31
Overview