Security Settings - Casio DT-X100 Series Software Manual

3.5 Security Settings

There are the following types of security.
(1) Password setting for date and time
A password can be set to block access to the date and time settings on the Control Panel, in order
to prevent the user from changing those settings on the terminal. Use PASSTOOL located under
Windows folder to make the setting.
This password is stored in the system area, together with the individual ID setting.
Refer to "3.5.1 Setting Password for Date and Time" about tool operation.
[Note]
In order to password input after device power-on, please introduce a separate "local security"
software.
(2) Setting individual IDs
Individual IDs are unique codes for identifying individual terminals.
The system library can be used to read individual IDs.
For details, refer to the System Library Manual.
(3) Setting distributor IDs
The individual ID and distributor ID can be used by the distributor and user to make a check when
the application is installed or used, to prevent illegal use of the application.
Distributor IDs are stored in the system area.
Use the User ID Setting Tool to register distributor IDs.
The User ID Setting Tool can be downloaded from a supporting site.
[Remarks] The system library can be used to read distributor IDs.
For details, refer to the System Library Manual.
104