Casio DT-X100 Series Software Manual page 109

[Others]Tab
Tab
Others Calibration Button
Restore default setting
Button
Get logdata Button
Version
Item
※ This button displays the OBR calibration screen to set up
the calibration of laser beam swing angle.
※ Follow the guidance appeared on the screen to complete
the calibration.
※ The swing angle has been set at the factory prior to
shipment.
※ Only if it is almost certain that the swing angle is not right,
adjust it in this mode.
This button resets setting contents and restores all the
settings to the default values.
This button captures log information for both the scanner
and decoder units. The following are the log file names.
 Scanner unit: "¥ObrLog.dat"
 Decoder unit: "¥DecodeLog.dat"
This tab displays version information for the Laser
Scanner setting tool.
109
[Version]Tab
Explanation