Casio DT-X100 Series Software Manual page 115

［Expasure/LED］Tab
Tab Item
Exposure/LED Aimer
Illumination
LED
Multi Step Normal
Mode
Multi Step
Mode
Package
Mode
Read Count
Separator
［Multi Step］Tab
This field is to set up the intensity of Aimer to either "0" for turning
off or "100" for turning on.
This field is to set up the intensity of Illumination to either "0" for
turning off or "100" for turning on.
This radio button selects the normal read mode.
This radio button selects the multi-step read mode which
continuously reads multiple symbols until when the Trigger key is
released.
This radio button selects the package read mode which
continuously reads multiple symbols until when the Trigger key is
released and then outputs a result of reading all the symbols.
This field is to set up the number of symbols to read in the
Multi-step and Package modes.
This field is to set up a character as the delimiter inserted in
between decoded data of scanned bar codes in the Package mode.
115
Explanation