Hardware Installation - Digicom LEONARDO56 User Manual

LEONARDO 56
2. INSTALLATION
2.1.

HARDWARE INSTALLATION

2.1.1. LEONARDO 56 EXTERNAL RS232
See the following picture
to connect your modem to the
COM port of your PC and the
telephone cable to the telephone line.
See the following picture to connect your modem to the GEO port of your
Macintosh® and the telephone cable to the
telephone line.
After the cable installation, connect the AC adapter
For the next step see the section Software Installation.
Installation
to the main power supply
outlet and switch ON the
power switch on the rear
panel. Check that the
green LED PWR indicator
light is on.
2.1