Digicom LEONARDO56 User Manual page 3

LEONARDO 56
PREFACE
All rights reserved; no part of this publication may be reproduced, stored in a retrieval
system, or trasmitted in any form or by any means, electronic, otherwise, without the prior
written permission of DIgicom S.p.A..
The contents of this booklet may be modified without prior permission.
Every possible care has been taken in testing and putting together all the documentation
contained in this booklet, however Digicom can not take any responsability brought by the
use of this booklet.
The following installation rules should be respected in order to have the best working
order of the equipment and for the user's safety.
ENVIROMENTAL CONDITIONS
For all devices:
ENVIROMENTAL TEMPERATURE
from 0 to + 45°C
Rapid changes of temperature or humidity should be avoided (0,03°C/min).
This equipment, including cables, should be installed in an area free from:
Dust, humidity, heat from direct sun light.
Objects which irradiate heat. These could cause damage to the container or other
problems.
Objects which produce a strong electtromagnetic field (loudspeakers, etc.)
Liquids or chemical corrosive substances.
GENERAL WARNINGS
For all equipment powered directly from mains power
POWER SUPPLY
ISOLATION CLASSIFICATIONS
NOMINAL CURRENTS
To avoid electric shock, the equipment should never be opened. Ask qualified personnel
help.
Disconnect the power cable from the wall outlet when the equipment is not to be used for
a long period. To disconnect the cable pull it by the plug, never pull it by the cable itself.
If there should be liquid or object penetration in the equipment, disconnect the power
cable and call a qualified personl for testing.
CLEANING THE TERMINAL
Use a clean and soft cloth. Wet the cloth with water or natural detergent if it is necessary
to remove any stains. Never use chemical products such as petrol or solvents.
VIBRATIONS OR DROPPING
Caution against vibrations and dropping
WARNING
This is a class A product.
In a domestic environment this product may cause radio interference
in which case the user may be required to take adequate measures.
Preface
RELATIVE HUMIDITY
from 20 to 80% n.c.
220-240 Volt single phase 50 Hz
only those indicated on the equipment label
only those indicated on the equipment label
III