LEONARDO 56
2.2.3. WINDOWS® 95/98/NT4.0 PC VERSION
The installation of the driver for the PC Card (PCMCIA) is a little bit different
for WIN95/98 release 4.00.950 or 4.00.950A or 4.00.950B.
In this section is described the procedure for NT4.0 and WIN95/98 version
4.00.950B.
If you have different WIN95/98 release or a totaly different OS, please take
the correct information from the Floppy Disk or the CDROM packaged with
the modem.
1. Run Windows®95/98/NT4.0
2. Select from the START icon : Settings-Controll Pannel- Modem- Add. From the new
window select Modem PCMCIA and then click Next.
3. Insert the PC Card into the PCMCIA slot of your PC paying attention insert the card the
correct way up (see the indication on the PC Card sticker).
4. Insert the Floppy disk or the CD ROM in the drive and from the window: Install from disk
check that the correct driver letter appears where your Floppy/CD ROM is inserted (eg.
A or D), then click the button Finish.
2.10
Installation