LEONARDO 56
3.3.
CONNECTION MESSAGE
After the handshake phase the modem gives a message indication to your
Computer.
The syntax of these messages (when ATX1) is in according to the value of
register S95 and the state of the ATWn command.
In the table bellow you can see the messages available:
S95
ATW0
0
CONNECT Dte
1
CONNECT Dce
2
CONNECT Dte/ARQ
CONNECT Dte/Arq
4
CARRIER Dce
CONNECT Dte
PROTOCOL: Prot.
8
PROTOCOL: Prot.
CONNECT Dte
PROTOCOL: Prot.
32
COMPRESSION: Comp.
CONNECT Dte
PROTOCOL: Prot.
COMPRESSION:Comp
Dce
= Line Speed
Dte
= Interface Speed
Comp.
= V.42bis - MNP5 - NONE
Prot.
= V.42 - LAPM - NONE
COMMAND
DESCRIPTION
ATX
List of available messages
ATW
Answer message Format
ATS95
Connection message management
3.13
Modem AT Command Set
ATW1
ATW2
CARRIER Dce
CONNECT Dce
PROTOCOL: Prot.
CONNECT Dte
CARRIER Dce
CONNECT Dce
PROTOCOL: Prot.
CONNECT Dce
CARRIER Dce
CONNECT Dce/ARQ
PROTOCOL: Prot.
CARRIER Dce
CARRIER Dce
CONNECT Dce
CONNECT Dte
CARRIER Dce
PROTOCOL: Prot.
CONNECT Dce
CONNECT Dte
CARRIER Dce
COMPRESSION: Comp.
CONNECT Dce
CONNECT Dte