Table of Contents
Advertisement
INSTALLATION INSTRUCTIONS
1) REMOVING THE TRANSPORTATION SCREWS:
* PLEASE NOTE THAT FAILURE TO REMOVE THE TRANSPORTATION
SCREWS WILL RESULT IN YOUR GUARANTEE BECOMING VOID! *
o THE TRANSPORTATION SCREWS, WHICH CAN BE FOUND AT THE REAR OF YOUR
WASHING MACHINE, MUST BE TAKEN OFF BEFORE YOU CAN USE YOUR
MACHINE.
o HOW TO REMOVE THESE SCREWS:
1) LOOSEN THE SCREWS BY ROTATING ANTICLOCKWISE WITH A SUITABLE
WRENCH (DIAGRAM-1).
2) REMOVE THE SCREWS BY PULLING THEM (DIAGRAM-2).
3) THE PLASTIC PARTS FOUND IN THE INTERIOR OF YOUR WASHING
MACHINE WILL FALL DOWN UNDER THE DEVICE.
4) LIFT YOUR MACHINE UP SLIGHTLY, PICKING UP THE PLASTIC PARTS. IF
THERE ARE STILL SOME THAT HAVE NOT FALLEN DOWN, OPEN YOUR
MACHINE'S DOOR AND MOVE THE DRUM WITH YOUR HAND TO MAKE THE
REMAINING PARTS FALL DOWN. COLLECT THE PARTS THAT HAVE
FALLEN TO THE FLOOR.
5) INSERT THE PLASTIC TRANSPORTATION SCREW CAPS (THESE CAN BE
FOUND INSIDE THE ACCESSORIES BAG) IN THE HOLES WHERE THE
TRANSPORTATION SCREWS HAD BEEN (DIAGRAM-3).
6) KEEP THE TRANSPORTATION SCEWS AFTER YOU HAVE REMOVED THEM
FROM THE MACHINE – YOU MAY NEED THEM SHOULD YOU MOVE HOME
IN THE FUTURE.
_____________________________________________________________________________
ADJUSTING THE FEET
o DO NOT INSTALL YOUR MACHINE ON RUGS OR CARPETS.
o FOR YOUR WASHING MACHINE TO WORK SILENTLY & WITHOUT
o YOU CAN ADJUST YOUR WASHING MACHINE'S LEVEL BY TURNING
32
ANY VIBRATION, YOU SHOULD POSITION IT ON FLAT, NON-
SLIPPERY & TOUGH GROUND.
ITS FEET EITHER UPWARDS OR DOWNWARDS (PLEASE SEE
DIAGRAM ON NEXT PAGE).
Advertisement
Table of Contents
