Table of Contents
Advertisement
Installation
Remove from the packaging
· Remove package and take out the bottom board of
the cabinet from the foam cushion.
·
Open the lid of the washer to take out accessories.
·
Operation or washing on the foamed cushion is
strictly forbidden.
Installation of the drain hose if not fitted
Base foamed cushi o n
· Completely slide the drain
hose over the sewer.
· Fix it with the hoop.
( As shown in the figure )
5
Installation
Installation of the water inlet hose
Fasten one end of the inlet hose to the tap
(there is a rubber sealing washer inside)
Tightly screw the other end of the inlet hose on the
water inlet valve . (with rubber sealing ring inside).
Note: When tightening the clamping nut, evenly apply the
force and do not twist the valve in case breaking
the valve joint.
Water inlet hose
Clamping nut
6
Advertisement
Table of Contents
