Installation Instructions - Baumatic BWD12 Instruction Manual

INSTALLATION INSTRUCTIONS

REMOVING THE TRANSPORTATION SCREWS:
* PLEASE NOTE THAT FAILURE TO REMOVE THE TRANSPORTATION
SCREWS WILL RESULT IN YOUR GUARANTEE BECOMING VOID! *
o THE TRANSPORTATION SCREWS, WHICH CAN BE FOUND AT THE REAR OF YOUR
WASHING MACHINE, MUST BE TAKEN OFF BEFORE YOU CAN USE YOUR
MACHINE.
o HOW TO REMOVE THESE SCREWS:
1) LOOSEN THE SCREWS BY ROTATING ANTICLOCKWISE WITH A SUITABLE
WRENCH (DIAGRAM-1).
2) REMOVE THE SCREWS BY
PULLING THEM (DIAGRAM-2).
3) THE PLASTIC PARTS FOUND IN
THE INTERIOR OF YOUR WASHING
MACHINE WILL FALL DOWN
UNDER THE DEVICE.
4) CAREFULLY, LIFT YOUR MACHINE
UP SLIGHTLY, PICKING UP THE
PLASTIC PARTS. IF THERE ARE
STILL SOME THAT HAVE NOT
FALLEN DOWN, OPEN YOUR
MACHINE'S DOOR AND MOVE THE
DRUM WITH YOUR HAND TO MAKE
THE REMAINING PARTS FALL
DOWN. COLLECT THE PARTS
THAT HAVE FALLEN TO THE
FLOOR.
5) INSERT THE PLASTIC
TRANSPORTATION SCREW CAPS
(THESE CAN BE FOUND INSIDE
THE ACCESSORIES BAG) IN THE
HOLES WHERE THE
TRANSPORTATION SCREWS HAD
BEEN (DIAGRAM-3).
6) KEEP THE TRANSPORTATION
SCEWS AFTER YOU HAVE
REMOVED THEM FROM THE
MACHINE – YOU MAY NEED THEM
SHOULD YOU MOVE HOME IN THE
FUTURE.
32