Piv - Purse Init Value; Prv - Purse Read Value - AEG ARE DT1 Installation Manual

3.5.9 PIV – purse init value
With this command you can initialize a value. This command is only valid with mifare standard 1K/4K.
You have to log in first.
Input format:
Output:
Parameters:
PARAMETER 1
1 or 2 characters
PARAMETER 2
1 character
PARAMETER 3
8 characters
PARAMETER 4
2 characters
3.5.10 PRV – purse read value
With this command you can read out a value. This command is only valid with mifare standard 1K/4K.
You have to log in first.
Input format:
Output:
Parameters:
PARAMETER 1
1 or 2 characters
--------------------------------------------------------------------------------31/45--------------------------------------------------------------------------------
PIV <SP> parameter 1 <SP> parameter 2 <SP> parameter 3 <SP> param-
eter 4 <CR>
parameter 3 <SP> parameter 4 <CR>
FUNCTION
sector
FUNCTION
block
FUNCTION
value
FUNCTION
optional address
PRV <SP> parameter 1 <SP> parameter 2 <CR>
parameter 3 <SP> parameter 4 <CR>
FUNCTION
sector