Table of Contents
Advertisement
3.2
Instructions for the hardware settings
3.2.1 BD – baudrate
The command BD enables the change of the baud rate. The settings are directly effective.
Input format:
Output (example):
Parameter:
PARAMETER
0
1
2
3
4
5
3.2.2 HF – radio frequency
With the command HF you can switch the antenna field on and off.
Input format:
Output (example):
Parameter:
PARAMETER
0
1
3.2.3 HID – human interface device/keyboard
The command switches the interface ether to HID or RS232 emulation.
Input format:
--------------------------------------------------------------------------------11/45--------------------------------------------------------------------------------
BD <SP> parameter <CR>
2 <CR>
FUNCTION
4800 baud
9600 baud
19200 baud
38400 baud
57600 baud
115200 baud
HF <SP> parameter <CR>
1 <CR>
FUNCTION
off
on
HID <SP> parameter <CR>
Advertisement
Table of Contents
