Table of Contents
Advertisement
3.3.4 INIT – initialization
With the command INIT all paramters of this command set are set to the default values. After that
you can save the settings with the command VSAVE.
Input format:
Output (example):
3.3.5 LAA – LED automatic activity
The leds can be controlled by the reader or over the interface. You can set it up with the command LAA.
If the LEDs are controlled by the reader, the reader beeps and flashes after successful reading and writ-
ing.
Input format:
Output (example):
Parameter:
PARAMETER
0
1
3.3.6 MC – mirror code
With this command you can change the output order of the bytes from a transpondercode.
Input format:
Output (example):
Parameter:
PARAMETER
0
1
--------------------------------------------------------------------------------18/45--------------------------------------------------------------------------------
INIT <CR>
ACK <CR>
LAA <SP> parameter <CR>
0 <CR>
FUNCTION
manual controlling
controlled by reader
MC <SP> parameter <CR>
0 <CR>
FUNCTION
normal sequence
mirrored sequence
Advertisement
Table of Contents
