Log - Transponder Log In; Pbu - Purse Backup - AEG ARE DT1 Installation Manual

PARAMETER
A
B
3.5.5 LOG – transponder log in
The command LOG is only valid with mifare standard 1K/4K transponders. The log in is necessary to
read or write a page:
Input format:
Input (example):
Output (example):
Parameters:
PARAMETER 1
A or B
PARAMETER 2
1 or 2 characters
PARAMETER 3
12 characters
3.5.6 PBU – purse backup
With this command it is possible to copy a purse value to an other block of the same sector. This com-
mand is only valid with mifare standard 1K/4K. You have to log in first.
Input format:
Output:
Parameters:
PARAMETER 1
1 or 2 characters
--------------------------------------------------------------------------------28/45--------------------------------------------------------------------------------
FUNCTION
key type A
key type B
LOG <SP> parameter 1 <SP> parameter 2 <SP> parameter 3 <CR>
LOG <SP> A <SP> 1 <SP> FFFFFFFFFFFF <CR>
ACK <CR>
FUNCTION
type of the key
FUNCTION
sector
FUNCTION
key
PBU <SP> parameter 1 <SP> parameter 2 <SP> parameter 3 <CR>
parameter 4 <SP> parameter 5 <CR>
FUNCTION
sector