Cisco Linksys WVC54GCA User Manual page 26

Chapter4
Resolution
Use the Resolution drop-down menu to select the display
resolution . Possible values are Auto (default), 60x80,
0x0, or 160x10 . The display changes to the new
resolution immediately after it is selected .
View Video Screen (320x240 Resolution)
View Video Screen (160x120 Resolution)
Zoom Factor
You use the Zoom button to zoom in and out of the
displayed video .
Zoom Button
When you click the button, the cursor changes to a
magnifying glass labeled with the current zoom factor
(cycles through 1x, 2x, and 4x) . Position the cursor over the
part of the image you want to magnify and click once .
Wireless-G Internet Home Monitoring Camera
Advanced Configuration with the Web-based Utility
Snapshot
You use the Snapshot button to capture a still image of
the video display .
When you click this button, the Snap Shot window
appears . Click Save to save the image, or click Cancel to
exit without saving the image .
Audio
Use the Audio button to toggle the sound on or off from
the Camera's built-in microphone . The button's appearance
indicates whether the sound is on or off . When the sound
is on, you can adjust the volume by sliding the volume
control to the left to lower the volume, or to the right to
increase the volume .
Audio Button:
Sound ON
Video Format
To select the video format, click the Video Format button,
and the Video Format window appears . Select either
MPEG- or MJPEG, then click Save . To exit without saving,
click the X in the upper-right corner of the window .
Snapshot Button
Snap Shot Window
Audio Button: Volume Adjustment
Sound OFF
Video Format Button
Video Format Window
18