Cisco Linksys WVC54GCA User Manual page 255

L.
If you want to keep the Camera's
default password (admin), leave the
fields unchanged and click Next . If you
want to change the password, enter
the new password, re-enter to confirm,
then click Next .
M.
The Wizard will search for wireless
networks, then list the wireless
networks found . If the network you
want to connect to is not listed, click
Refresh to update the list . Select the
wireless network that you want, then
click Next .
N.
The Wizard displays the security method of your network: WPA/WPA-Personal,
WEP (18-Bit), or WEP (6-Bit) . Follow the appropriate instructions below . If you
are not using wireless security, select Disabled and go to step O .
WPA/WPA-Personal
passphrase in the Passphrase field
and click Next . The passphrase is
case-sensitive and must be from 8 to 63
characters in length .
WEP (6-Bit) or WEP (18-Bit)
generate the WEP key automatically,
enter a passphrase in the Passphrase
field and click Next . The case-sensitive
passphrase should not be longer
than 16 characters . It must match the
passphrase of your wireless network
and is compatible with Linksys wireless
products only . (If you have any non-
Linksys wireless products, enter the
WEP key manually on those products .)
Enter a
To
Installation
5