General Procedures; Power On/Boot Up; System Boot-Up/Shutdown - GE LOGIQ 180 Basic Service Manual

GE M S
EDICAL YSTEMS
D 2317229, R
IRECTION EVISION
Section 4-2

General Procedures

4-2-1

Power On/Boot Up

NOTE: After turning off the system, wait at least ten seconds before turning it on again. The system
may not be able to boot if power is recycled too quickly.
SYSTEM REQUIRES ALL COVERS
CAUTION
Operate this unit only when all board covers and frame panels are securely in place. The
covers are required for safe operation, good system performance and cooling purposes.
Lockout/Tagout Requirements (For USA only)
NOTICE
Follow OSHA Lockout/Tagout requirements by ensuring you are in total control of the Power Cable
on the system.
TAG
&
LOCKOUT
Signed Date
4-2-1-1

System Boot-UP/Shutdown

Purpose: This is a description on how to Shut Down/Power-UP the system.
4 - 2
3
Section 4-2 - General Procedures
LOGIQ™ 180 B S
ASIC ERVICE
M
ANUAL