GE LOGIQ 180 Basic Service Manual page 68

GE M S
EDICAL YSTEMS
D 2317229, R
IRECTION EVISION
B.) Footswitch Connection
The foots witch which is the remote FREEZE device is connected to the rear panel of the system. this
extra FREEZE switch is provided to enhance flexibility to freeze images when the system is not within
reach of the user.
Pin Assignment of Foot Switch Connector
C.) Video Graphic Printer (VGP)
Connect the Video Graphic printer (with BNC to BNC cable) Video IN to the Video OUT located on the
rear panel of the system, also establish shutter (with Mini Jack cable) if required.
Model: (Sony UP-890MD/CE/MDG or UP-895MDW/MD/SYN) / (Mitsubishi P91E)
D.) Pin Assignment of Mini Jack controlling VGP
E.) Video Casette Recorder
Connect the VCR Sony SVO-9500MD (H4120SR) for NTSC and Sony SVO 9500MDP(E11801AA) for
PAL System to the Video IN socket in the rear panel. Press the "EXT. VIDEO" button on the keyboard
to enable an external video signal on the system monitor.
3 - 24
3
Figure 3-24 Foot Switch Connector (Round 5-pin connector)
Pin No.
1
2
3
4
5
Figure 3-25 Foot Switch Connector
Pin No.
1
2
Section 3-6 - System Configuration
LOGIQ™ 180 B
Signal
Foot Switch
GND
GND
GND
GND
Signal
Shutter
Signal GND
S M
ASIC ERVICE ANUAL