Adjustment; Preparation; Required Equipment - Sony IPELA SNC-CS11 Service Manual

m
. Be sure to perform adjustment, confirmation, and defect correction referring to this section when the
board of this unit is repaired and replaced.

2-1. Preparation

2-1-1. Required Equipment

J-6029-140-B: Pattern box PTB-500 or
J-6431-850-A: Pattern box PTB-700
. Used for the light source of an adjustment chart.
J-6433-540-A: Vectorscope scale
. Used for color reproduction adjustment. (This scale is
printed in a back cover.)
R-Y
R
YL
G
J-6020-250-A: Color-bar chart (for PTB-500) or
J-6027-100-A: Color-bar chart (for PTB-700)
. Used for color reproducibility adjustment.
YI C G
Y
m
. There are no characters on the color-bar chart.
. The above figure is for PTB-500.
SNC-CS10/CS11
Section 2

Adjustment

MG
J-6433-540-A
B-Y
B
CY
W M R B
g
J-6433-100-A: Alarm and serial IF tool board
J-6080-058-A: Color temperature correction filter C14
. Clear chart:
. Software for PR board adjustment: J-6433-610-A
(Camera adjustment.exe)
. Software for SY board check:
. Personal computer (PC)
OS:
CPU:
Memory:
Empty capacity of HDD:
. Waveform monitor
. Color monitor
. Vectorscope
. Power supply for SNC-CS10/CS11
J-6080-621-A
J-6433-620-A
Windows 2000/XP
Pentium series
32 MB or more
100 MB or more
2-1