Rfid Reader Ports; Led Indicators - Honeywell IF1C User Manual

RFID Reader Ports

Depending on your configuration, the ports that are available on the RFID reader
may be different.
1
Callout
1
2
3
4
Caution: Professional Installation Required: Government regulatory

LED Indicators

The LED indicators on the reader light up to indicate the status of the reader
during operation.
2
2
3
4
Port Description
Ethernet 10Base/100Base-T port that connects the reader to your Ethernet
network. The reader auto-negotiates with the server to set the best
data rate. This port uses MDI/MDI-X auto-switching so you can
connect either a standard Ethernet cable or a crossover cable.
The port also supports Power Over Ethernet (POE). To power the
reader, you need an 802.3af-compliant power supply.
GPIO General purpose input/output (GPIO) port that connects the reader to
industrial controls such as relays or indicators. It also supports
RS-232 and Wiegand Interface multiplexed with GPOs
USB Connects the reader to a desktop PC for configuration.
Antenna Connects an external antenna to your reader. The antenna port uses
Reverse TNC connectors.
agencies require this RFID reader to use only approved
antennas and cables.
IF1C Fixed RFID Reader User Guide